China Motorcycle Sprocket for CG125 did chain and sprocket kit

Product Description

Bike Sprocket Wheel, Bike Sprocket Established, Chain Sprocket, Motorcycle Components, Rear Sprocket, Entrance Sprocket, Cg125 Sprocket, Internal Sprocket, Motor Element, Motor Sprocket, Bike spare Components, Motorcycle chain wheel, motorbike chain, Sprocket Wheel, Sprocket
Honda:
C50, B50, C70, CD70, DAX70, MB80, C90, CD90, S90, H100, C100, C100-BIZ, CB100, CD100, MB100, XL100, S110, CB125, CD125, CG125, TITAN-99, TITAN-2000, TITAN-one hundred fifty, NX125, XL125, XLR125, GL145, CBX150, NXR150 BROS, CBX200, NX200, TRX200, XL200R, CB250, XL250, CBR250, NX250, CBX250, VT250, XL250, NX250, TRX350, CB400, CBR400, NX350SHAHAR, XLX250/350, NX200, XR250, XR200, CB250N, CD100, DAX70, NX400, XR200, XR250, XR200R, GS125
SUZUKI:
A50, GT50, RV50, A80, FR80, DS80, FR80N, RV90, A100, AX100, FB100, FR100, TS100, GP100, ER100, TS100Z, AX115, FD115, CN125, ER125, GN125, GP125, GS125, TR125, AX115, FR100, C70, C90, TS185ER, G7T
YAMAHA:
DT50, GT50, RD50, RX50, YB50, RD75, FS80, GT80, LB80, RX80, V80, YB80, AG100, DT100, DX100, RS100, RX100, YB100, DT125, DT125T, DT125K, DT125R, RD125, RZD125, RS125, SR125, TW125, TZR125, YB125, XT125, YBR125, RD135, RX135, RXZ135, DT150, SR150, DT175, DT180, MX180, RX180, XV250, DT250, SR250, XT250, DT175K 6H, DT175K 4H, TDR250, YZ125, SIGMA100, CRYPTON
KAWASAKI:
GTO125, KAZE-R, GTO110
DAELIM LIBERTY 12T X 44T
ENG DAELIM ALTINO a hundred 40T
GARELLI ESTR 10T
GILERA SMASH 110 15T X 36T
GUERRERO Day a hundred 15T X 38T
GUERRERO FLASH 110 14T X 41T
GUERRERO GLX 14T X 56T
GUERRERO Journey one hundred ten 14T X 36T
HERO PUCH 13T X 33T
INTRUDER/HYOSUNG TN one hundred twenty five 14T
JNG SUZUKI GS/KATANA 125
JUKI DRIB 12T
MIN C/REBORDE 9T
MIN C/REBORDE 10T
N MAX(420) 39T
N MAX 100(420) 15T
RZF200/ANDINA125/RB125/00(seventy seven-)/PATAG 14T
TVS 13T X 39T
XX125/RX125/RZA125/SAPUCA125
Z RX/RZA125 44T
ZAN SOL 42T
ZAN XX125 15T
ZANELLA 70(Hearth Additionally) 10T
ZANELLA Owing/POCK 35T
ZANELLA Owing/POCK 38T
ZANELLA XX125/RX125/SAPUCA125
There are numerous things for Austrialia, Indonesia, Malaysia, Singapore, Thailand, Philippines, India, Turkey, Sri Lanka, West African, South African market and so on.
Your enquiry will be very appreciated.

Chain No. Pitch Roller diameter Width amongst interior plates Pin diameter Pin duration Interior plate depth Plate thickness Ultimate tensile toughness Typical tensile strength Fatigue
p d1 max b1 min Ld2 max max Lc max h2 max T1 Q min Q0 amx
mm mm mm mm mm mm mm mm kn kn kgf
06B nine.525 6.35 5.72 3.28 13.two 14.two 8.two 1.3 9 10  
415 twelve.seven seven.75 4.88 3.96 twelve.5 13.9 10.four 1.3 eleven.six 12.five 380
415H twelve.7 7.75 4.88 three.ninety six 13.1 fourteen.5 11.5 1.five 15.six 16.one 380
420 twelve.7 seven.77 six.35 three.96 14.5 16.1 twelve 1.five sixteen 16.5 380
420H 12.seven seven.77 6.35 three.ninety six 15.seven seventeen.four 12 1.8 seventeen seventeen.5 380
428 twelve.seven eight.51 seven.seventy five 4.forty five 16.five 18.05 twelve 1.six 17.eight eighteen.five 380
428H 12.7 eight.fifty one seven.75 four.forty five eighteen.3 19.08 twelve 2.03 twenty.6 21.1 450
428HG 12.seven 8.51 7.seventy five four.51 eighteen.9 20.1 12.three two twenty.six 21.five 450
520 15.875 10.16 six.35 five.08 seventeen.7 19 15 two 26.five 29.5 650
520H 15.875 10.16 6.35 five.24 18.nine 20.5 fifteen two.42 thirty 31 700
525 fifteen.875 ten.sixteen 7.ninety four five.08 18.8 20.five 15 2.03 26.6 29 650
525H fifteen.875 10.16 7.74 5.24 20.four 22.two fifteen two.42 30 31 seven-hundred
530 15.875 ten.sixteen nine.four five.08 20.nine 22.2 fifteen 2 26.5 29.7 650
530H fifteen.875 10.16 9.four 5.08 21.9 24.2 15 2.forty two thirty 31.five 700
630 19.05 11.91 9.four five.ninety four 22.2 24 eighteen two.4 35 37 800

US $2
/ Piece
|
500 Pieces

(Min. Order)

###

Type: Sprocket
Number of Row: Single Row
Material: Steel
Surface Treatment: Blacken, Zinc Plated
Module: Cg125
Transport Package: Carton Package

###

Customization:

###

Chain No. Pitch Roller diameter Width between inner plates Pin diameter Pin length Inner plate depth Plate thickness Ultimate tensile strength Average tensile strength Fatigue
p d1 max b1 min Ld2 max max Lc max h2 max T1 Q min Q0 amx
mm mm mm mm mm mm mm mm kn kn kgf
06B 9.525 6.35 5.72 3.28 13.2 14.2 8.2 1.3 9 10  
415 12.7 7.75 4.88 3.96 12.5 13.9 10.4 1.3 11.6 12.5 380
415H 12.7 7.75 4.88 3.96 13.1 14.5 11.5 1.5 15.6 16.1 380
420 12.7 7.77 6.35 3.96 14.5 16.1 12 1.5 16 16.5 380
420H 12.7 7.77 6.35 3.96 15.7 17.4 12 1.8 17 17.5 380
428 12.7 8.51 7.75 4.45 16.5 18.05 12 1.6 17.8 18.5 380
428H 12.7 8.51 7.75 4.45 18.3 19.08 12 2.03 20.6 21.1 450
428HG 12.7 8.51 7.75 4.51 18.9 20.1 12.3 2 20.6 21.5 450
520 15.875 10.16 6.35 5.08 17.7 19 15 2 26.5 29.5 650
520H 15.875 10.16 6.35 5.24 18.9 20.5 15 2.42 30 31 700
525 15.875 10.16 7.94 5.08 18.8 20.5 15 2.03 26.6 29 650
525H 15.875 10.16 7.74 5.24 20.4 22.2 15 2.42 30 31 700
530 15.875 10.16 9.4 5.08 20.9 22.2 15 2 26.5 29.7 650
530H 15.875 10.16 9.4 5.08 21.9 24.2 15 2.42 30 31.5 700
630 19.05 11.91 9.4 5.94 22.2 24 18 2.4 35 37 800
US $2
/ Piece
|
500 Pieces

(Min. Order)

###

Type: Sprocket
Number of Row: Single Row
Material: Steel
Surface Treatment: Blacken, Zinc Plated
Module: Cg125
Transport Package: Carton Package

###

Customization:

###

Chain No. Pitch Roller diameter Width between inner plates Pin diameter Pin length Inner plate depth Plate thickness Ultimate tensile strength Average tensile strength Fatigue
p d1 max b1 min Ld2 max max Lc max h2 max T1 Q min Q0 amx
mm mm mm mm mm mm mm mm kn kn kgf
06B 9.525 6.35 5.72 3.28 13.2 14.2 8.2 1.3 9 10  
415 12.7 7.75 4.88 3.96 12.5 13.9 10.4 1.3 11.6 12.5 380
415H 12.7 7.75 4.88 3.96 13.1 14.5 11.5 1.5 15.6 16.1 380
420 12.7 7.77 6.35 3.96 14.5 16.1 12 1.5 16 16.5 380
420H 12.7 7.77 6.35 3.96 15.7 17.4 12 1.8 17 17.5 380
428 12.7 8.51 7.75 4.45 16.5 18.05 12 1.6 17.8 18.5 380
428H 12.7 8.51 7.75 4.45 18.3 19.08 12 2.03 20.6 21.1 450
428HG 12.7 8.51 7.75 4.51 18.9 20.1 12.3 2 20.6 21.5 450
520 15.875 10.16 6.35 5.08 17.7 19 15 2 26.5 29.5 650
520H 15.875 10.16 6.35 5.24 18.9 20.5 15 2.42 30 31 700
525 15.875 10.16 7.94 5.08 18.8 20.5 15 2.03 26.6 29 650
525H 15.875 10.16 7.74 5.24 20.4 22.2 15 2.42 30 31 700
530 15.875 10.16 9.4 5.08 20.9 22.2 15 2 26.5 29.7 650
530H 15.875 10.16 9.4 5.08 21.9 24.2 15 2.42 30 31.5 700
630 19.05 11.91 9.4 5.94 22.2 24 18 2.4 35 37 800

Choosing the Right Chain Sprocket For Your Bike

When deciding which chain sprocket to buy, you should be aware of how they fit on the bike. These sprockets are often secured to the bike’s shaft by either one or more set screws. ANSI standards for sprocket keyways provide the proper dimensions for a given shaft diameter. However, they aren’t universal and might not apply to all applications. As a result, it is important to consult a supplier who is familiar with the exact keyway dimensions.
sprocket

Roller chain sprocket

A Roller chain sprocket is a gear with toothed rollers. The tooth profile determines the arc length of the roller. A roller with an undercut tooth profile will not transmit movement properly. For this reason, the pitch line of the roller should be equal to the incremental circle length (r) divided by the number of teeth.
The chain sprocket is available in various types. They can be used in conveyor chains. They are usually available as ready-to-mount units. Finished bores and wide hubs are available for mounting them. They are also available with a roller-bearing design.
The teeth of sprocket wheels are derived from the involute-trochoid curve. In order to engage with these teeth, the roller chain must be sufficiently accurate to avoid backlash. However, conventional roller chains can also engage with these teeth. However, this cannot eliminate backlash completely. This is why the invention provides means for reducing the friction between the teeth and the roller. This also increases the life span of the roller-and-sprocket transmission.
In terms of standards, the ANSI standard is widely used in the industry. It accounts for nearly 15% of the market in Europe and holds an advantage over the ISO standards. In North America, manufacturers of sprockets follow the ANSI code B 29.1. The ANSI code provides clear design guidelines and allows for interchangeability among different types.
There are many considerations to make when selecting a sprocket. A key factor is the transmission input. For example, if the transmission has a high horsepower, the center distance between the large and small sprockets is smaller. To compensate for this, a chain with a smaller pitch may be appropriate. Also, if the transmission has a high horsepower ratio, a multiple-strand drive is a viable option.
If you’re looking for a quality roller chain sprocket, you should check out MDS. They stock a wide range of types and sizes for a variety of industrial machinery.

Gap-tooth sprocket

A gap-tooth chain sprocket has tooth-head heights greater than the ISO tooth form height. This ensures that the pins and rollers meet at a point near the tooth head, and eliminates pulsating movement and intermittent changes in speed.
The front and rear surfaces of the sprocket are convex arcs, with radii equal to each other and the center of the tooth gap bottom. This allows for a uniform pitch and reduced friction. The tooth-face height of a gap-tooth chain sprocket is equal to the pitch of the chain, while the radii of its tooth-faces are larger than that of an ISO tooth-form.
One form of gap-tooth chain sprocket has four teeth at regular intervals. The teeth are interconnected by arc-shaped tooth gap bottoms. The resulting chain pitch is called the chain pitch. The gap-tooth sprocket can be used on various types of wheels.
ISO 606 1994 (E) defines the standard chain length, while Japanese Industrial Standards (JIS B 1801) define the standard tooth form. The ISO and Japanese Industrial Standards define two different tooth forms, namely S-tooth and U-tooth. The ISO and Japanese Industrial Standard tooth forms have different tooth pitches, but the root diameter of both forms is the same. The distance between each tooth is measured from the pitch polygon.
The tooth gap bottom circle of the gap-tooth sprocket gradually contacts the surface of the front tooth in the opposite side of the tooth gap. As this process continues, the tooth surface of the gap-tooth sprocket moves closer to the tooth head. This reduces the impact, which results in less noise.
The gap-tooth chain sprocket is an ideal solution for many applications. It allows the chain to disengage easily. With the same frequency, the teeth of the sprocket also help in regulating vibration. A sprocket with short teeth will be easier to disengage when necessary.
Another popular style of gap-tooth chain sprocket is the random polygon 64. The random polygon is a quadrilateral. Each vertex of the quadrilateral is assigned to one of the four consecutive pins on the uniform chain. The four consecutive pins are aligned in a gap-tooth pattern.
sprocket

Steel split sprocket

Split sprockets are perfect for large portions of the drive system, as they can be installed without disassembling the entire shaft assembly. These sprockets are also useful in applications where there is limited workspace. They can be installed without disassembling the entire shaft assembly, minimizing the risk of damage to the conveyor system and reducing downtime.
There are several different types of split sprockets, including mat chains and table chains. Each type differs in bore diameter, number of teeth, block body style, and abrasion resistance. Some are made from steel, while others are made from a non-split material.
Split sprockets are available from many manufacturers. Typically, the split sprockets are made with two pieces of steel, which are then joined together again. This assembly technique is a cost-effective way to mount sprockets on a shaft. These sprockets can be stocked in multiple sizes and keyways.
Stainless Steel sprockets are available in stock and custom configurations. They are designed to last for years to come. These sprockets are suitable for conveyors, power transmission systems, and robotics. In addition, these sprockets offer heightened quality and durability. Some of these sprockets feature a bevel or spiral bevel gear, while others are made from helical gear.
Split sprockets are available in a variety of sizes. For instance, the RCS-03 is a plain bore type, while the RCS-04 is a finished bore type. Split sprockets are available with a split taper bushed design. They are also available with either single or multiple strands.
sprocket

Double-duty sprocket

If you are looking for a heavy-duty chain sprocket, you have many choices. They come in different sizes, shapes, and materials. Some have wide teeth while others have narrow teeth. You should choose a sprocket that has the correct tooth pitch for your chain’s pitch diameter. You should also pay attention to the sprocket’s bore, or the hole in its center through which the drive shaft passes.
The type of transmission will also determine the type of sprocket you need. High-power transmissions, for example, require higher-pitch sprockets than lower-pitch models. To make sure that you choose the right sprocket for your application, check the horsepower and pitch of your transmission. If you have a low-pitch transmission, choose a smaller chain pitch. High-horsepower transmissions may also require multiple-strand drive.
There are different standards for sprockets, but ANSI standards are widely accepted. For instance, ANSI code B 29.1 requires sprockets to have two teeth per chain pitch, whereas ISO standards call for three. The double-duty sprocket, on the other hand, engages every other tooth. This helps the sprocket’s lifespan.
There are many different sprockets, and each has different performance characteristics. Generally, sprockets are made of metal or reinforced plastic and are similar to bicycle gears in their wheel-shaped design. Different types of chain sprockets have different teeth and work with different types of chains. The design of the chain and sprocket also determines the type of sprocket needed.
One popular type of double-duty sprocket is the steel-split sprocket. Its pitch is half the pitch of the chain and is usually referred to as a ‘double-duty’ sprocket. It is often used for heavy-duty purposes, as it distributes the load evenly on the chain.
While sprockets come in different tooth pitches and diameters, the recommended number of teeth is 17. The more teeth on the sprocket, the longer it will last. The height of the teeth is also important. A sprocket with more teeth will increase the life of the chain.

China Motorcycle Sprocket for CG125     did chain and sprocket kitChina Motorcycle Sprocket for CG125     did chain and sprocket kit
editor by czh 2023-01-12

Conveyor Sprocket

As one of the leading conveyor sprocket manufacturers, suppliers, and exporters of mechanical products, We offer conveyor sprockets and many other products.

Please contact us for details.

Manufacturer supplier exporter of conveyor sprockets.

Recent Posts